Characteristics of Shanghai nylon material

2022/10/18

Normally, the printed nylon product should have a smooth surface and a solid layer, but the surface of the product printed with damp nylon material is not smooth, and the solid layer may even separate.

how to avoid edge

On the other hand, it is also a very troublesome problem that when printing nylon, the edge will appear like printing ABS. Maybe the first multi-layer printing is normal. When you check the printing status again, one side of the solid model has already been raised. Or even leaving the platform altogether to create a printing mess...

Regarding the characteristics of Shanghai nylon materials, not only the problems encountered in printing Shanghai nylon materials have been changed according to the support of the hardware upgrade package, but also more practical ones have been launched through in-depth analysis of Shanghai nylon materials. ​​

1. Hardware upgrade package

       

The update module actually consists of the following: 1 front bezel, 25 baseboard stickers, 1 adhesive wiper, 1 metal plate.

When printing the edged materials, the assembled front baffle can prevent the heat from escaping, resulting in a stable temperature of 45°C, and can also protect the printed parts from external hazards. A stable living environment ensures that the printing material cools more slowly and the temperature is more evenly distributed across all parts. This has the advantage of reducing shrinkage and reducing edge pick-up and delamination risks.

Baseboard decals optimize adhesion on the print platform and can be used with most raw materials. They are both great replacements for hot glue sticks and are set up for a variety of primary uses. The bottom plate sticker makes the bottom edge of the printed part smoother, and it should be used in a standardized manner during use to avoid bubbles.

The extra metal plate means you can no longer wait for the print to be removed from the printer. In turn, you can quickly replace a new sheet of metal with a new print immediately and gradually, thereby minimizing downtime.

The design is more reliable and easier to print than other nylon polyester yarns on the market, with low water absorption and good adhesion to the bottom plate. Compared with other nylon consumables, it has lower water absorption and longer shelf life. It has impact strength, good plasticity and melting temperature (185°C) much lower than traditional nylon consumables. In addition, it also takes into account the low friction resistance, alkali resistance and organic chemical corrosion resistance of other Shanghai nylon materials. Features.

Nylon supports are easier to remove after cooling. However, when using a raft, it is a good idea to remove the bottom plate while it is still insulated. This makes it easier to dismantle the raft.

Thank you for reading, I hope my sharing will be helpful to you.

 

Key words:

nylon powder,Shanghai nylon material

全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册