Nylon powder manufacturers will tell you about the advantages and disadvantages of nylon

2022/01/27

Nylon powder manufacturers will tell you about the advantages and disadvantages of nylon

Nylon powder manufacturers: What are the advantages and disadvantages of nylon?

First, the advantages of nylon:

1. High mechanical strength, good toughness, high tensile and compressive strength, higher specific tensile strength than metal, specific compressive strength comparable to metal, but not as rigid as metal, tensile strength close to yield strength, twice that of ABS Many, nylon powder manufacturers tell you that it can absorb shock and stress vibration, the impact strength is much higher than ordinary plastics, better than acetal resin.

2. Excellent anti-fatigue performance, can maintain the original mechanical strength after repeated bending, PA is often used in ordinary escalator handrails and new bicycle plastic rims with obvious periodic fatigue.

 

 

3. High softening point and heat resistance.

4. The surface is smooth, the coefficient of friction is small, and it is wear-resistant. It is self-lubricating when used as a low-noise movable mechanical part. It can be used without lubricant when the friction force is not too high; if lubricant is really needed to reduce friction or To help dissipate heat, water, oil, grease, etc. can be selected, so as a transmission component, it has a long service life.

5. Corrosion resistant, very resistant to alkali and most salt solutions, weak acids, motor oils, gasoline, aromatic compounds and general solvents, inert to aromatic compounds, but not resistant to strong acids and oxidants, it can resist gasoline, oil, fat, Corrosion of alcohol and weak alkali, it has good anti-aging ability, and can be used as packaging material for lubricating oil, fuel, etc.​​

Second, the disadvantages of nylon:

1. Poor water absorption and dimensional stability.

2. Poor low temperature resistance.

3. The antistatic property is not good.

4. Poor heat resistance.

Nylon powder manufacturer: nylon powder in reinforced nylon

Nylon powder manufacturers tell you that nylon powder in reinforced nylon materials is significantly different from fine coatings and dissolved additives. This difference refers to their dispersing properties. Dissolving additives are used for dispersing properties, while the coating in nylon powder is completely used. The dispersion properties of purified substances through compressed air.

Nylon powder manufacturers tell you that nylon powder coatings are dispersed in use and cannot be processed into large particle shapes. Therefore, nylon powder is mostly used in electrostatic spraying.

Nylon powder manufacturers tell you that the particle size of nylon powder in reinforced nylon is usually between 10 microns and 90 microns. If the nylon powder in reinforced nylon is less than 10 microns, it is superfine powder, which has no effect and will dissipate in the air when used.

The editor of the nylon powder manufacturer has introduced it here. Thank you for watching. Let's see you in the next issue.

 

Key words:

nylon powder

全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册